Led Wireless Seminar report

Date: 07 Feb 2016

In this Seminar Report paper, we reviewed the Led Wireless Seminar Report PDF PPT. The novel idea of this Seminar Report is to modulate light waves from visible LEDs for communication purposes. This concurrent use of visible LEDs for simultaneous signaling and communication, called iLight, leads to many new and interesting applications and is based on the idea of fast switching of LEDs and the modulation visible-light waves for free-space communications. The feasibility of such approach has been examined and hardware has been implemented with experimental results. The implementation of an optical link has been carried out using an LED traffic-signal head as a transmitter. The LED traffic light can be used for either audio or data transmission. Audio messages can be sent using the LED transmitter, and the receiver located at a distance around 20 m away can play back the messages with the speaker. Another prototype that resembles a circular speed-limit sign with a 2-ft diameter was built. The audio signal can be received in open air over a distance of 59.3 m or 194.5 ft. For data transmission, digital data can be sent using the same LED transmitter, and the experiments were setup to send a speed limit or location ID information. The work reported in this article differs from the use of infrared (IR) radiation as a medium for short-range wireless communications. Currently, IR links and local-area networks available. IR transceivers for use as IR data links are widely available in the markets. Some systems are comprised of IR transmitters that convey speech messages to small receivers carried by persons with severe visual impairments. The Talking Signs system is one such IR remote signage system developed at the Smith Kettlewell Rehabilitation Engineering Research center. It can provide a repeating, directionally selective voice message that originates at a sign. However, there has been very little work on the use of visible light as a communication medium. The availability of high brightness LEDs make the visible-light medium even more feasible for communications. All products with visible-LED components (like an LED traffic signal head) can be turned into an information beacon. This iLight technology has many characteristics that are different from IR. The iLight transceivers make use of the direct line-of-sight property of visible light, which is ideal in applications for providing directional guidance to persons with visual impairments. On the other hand, IR has the property of bouncing back and forth in a confined environment. Another advantage of iLight is that the transmitter provides easy targets for LOS reception by the receiver. This is because the LEDs, being on at all times, are also indicators of the location of the transmitter. A user searching for information has only to look for lights from an iLight transmitter. Very often, the device is concurrently used for illumination, display, or visual signage. Hence, there is no need to implement an additional transmitter for information broadcasting. Compared with an IR transmitter, an iLight transmitter has to be concerned with even brightness. There should be no apparent difference to a user on the visible light that emits from an iLight device. It has long been realized that visible light has the potential to be modulated and used as a communication channel with entropy. The application has to make use of the directional nature of the communication medium because the receiver requires a LOS to the audio system or transmitter. The locations of the audio signal broadcasting system and the receiver are relatively stationary. Since the relative speed between the receiver and the source are much less than the speed of light, the Doppler frequency shift observed by the receiver can be safely neglected. The transmitter can broadcast with viewing angle close to 180 . The frequency of an ON period followed by an OFF period to transmit information is short enough to be humanly unperceivable; so that it does not affect traffic control. This article aims to present an application of high-brightness visible LED for establishing optical free-space links.

Download Link beloew :



Related Posts

26 page

GPRS Technology

22 page

Fuel Cell

22 page

Adaptive optics

comments powered by Disqus


Top Stories

nyc subway

Gesture Recognition Technology Seminar Report

Gesture recognition is a topic in computer science and language technology with the goal of interpreting human gestures via mathematical algorithms. Gestures can originate from any bodily motion or state but commonly originate from the face or hand.

Read More »

danny antonucci

Smart Grid Seminar Report

A smart grid delivers electricity from suppliers to consumers using two-way digital technology to control appliances at consumers homes to save energy, reduce cost and increase reliability and transparency.

Read More »

watercolor paints

Blu-Ray Technology Seminar Report

Blu-ray is a new optical disc standard based on the use of a blue laser rather than the red laser of today’s DVD players. The standard, developed collaboratively by Hitachi, LG, Matsushita (Panasonic), Pioneer,etc

Read More »

apple ipod classic photo

Underwater Wireless Communication Seminar Report

Underwater wireless communication networks are particularly vulnerable to malicious attacks due to the high bit error rates, large and variable propagation delays, and low bandwidth of acoustic channels.

Read More »

web design magazines

Java Ring Seminar Report

A Java Ring is a finger ring that contains a small microprocessor with built-in capabilities for the user. It contains an inexpensive microprocessr in a stainless steel ibutton running a JVM and it is preloaded with applet

Read More »